Hook plate clavicle AO

Clavicle hook plate fixation is indicated when there is insufficient bone in the distal clavicular fragment for adequate fixation with a conventional or distal clavicle plate. The decision to proceed with hook plate fixation can be made preoperatively or intraoperatively if unanticipated inadequate fixation is obtained in the distal fragment The LCP Clavicle Hook Plate, combined with AO technique, provides stable fracture fixation with minimal trauma to vas-cular supplies. This helps create an improved environment for bone healing, accelerating the patient's return to previous mobility and function Background: The purpose of this study was to investigate clinical and radiologic outcomes of clavicle hook plate fixation for distal-third clavicle fracture (Neer type II) and to compare the clinical and radiologic outcomes and complications between Neer type IIA and type IIB. Methods: We retrospectively reviewed 35 patients who underwent open reduction and internal fixation with AO hook. Clavicle Hook Plate Tec hnique Guide Original Instruments and Implants of the Association for the Study of Internal Fixation — AO/ASIF. Overview The Clavicle Hook Plate provides a single solution for fixation of both lateral clavicle fractures and acromioclavicular joint injuries. This plate and scre

CONCLUSION: AO/ASIF clavicle hook plate functioned more effectively than Kirschner-wire tension band in clinical treatment of distal clavicle fractures and acromioclavicular joint dislocations. The former protocol enjoyed small incisions, firm fixation and early shoulder mobility. Therefore, it is a safe and effective surgical method that is. The LCP Clavicle Hook Plate, combined with AO technique, provides stable fracture fixation with minimal trauma to vas-cular supplies. This helps create an improved environment for bone healing, accelerating the patient's return to previous mobility and function. 4 Synthes LCP Clavicle Hook Plate Technique Guid 4 DePuy Synthes 3.5 mm LCP® Clavicle Hook Plates Surgical Technique AO Principles In 1958, the AO formulated four basic principles, which 1 4 2 3 4_Priciples_03.pdf 1 05.07.12 12:08 4 DePuy Synthes Expert Lateral Femoral Nail Surgical Technique AO PRINCIPLES In 1958, the AO formulated four basic principles, which.

ORIF - Hook plate for Lateral, displaced fracture with CC

Various surgical techniques have been introduced, such as K-wire fixation, 8 tension band wiring, 2 locking plate,19, 25 and hook plate.9, 17, 23 However, there is no consensus as to the gold standard of fixation for Neer type II distal clavicle fracture. The AO hook locking compression plate (LCP; Synthes, Solothurn, Switzerland), a fixation technique originally used for. Clavicle Hook Plate. The 3.5 mm LCP ® Clavicle Hook Plate provides fixation for lateral clavicle fractures and for acromioclavicular joint injuries. Instructions for use are found in the information that accompanied the product packaging AO clavicle hook-plates are useful fixative implants for unstable fractures of the distal clavicle. Static fixation was achieved and physiotherapy can be started immediately after surgery. Early removal of the implant is recommended however because hooks inserted under the acromion migrated into the

AO teaching video: Lateral Clavicle—Dislocations and Fractures—The LCP Clavicle Hook Plate VariAx® Clavicle Stryker Plating. 2 All non-sterile products may be ordered 703701 2.0mm Drill AO connection for use with 2.7mm screws 703876 Hook Plate Trial Ruler. 9 Notes. 10 Notes. 11 Notes. This document is intended solely for the use of healthcare professionals. A surgeon must always rely on his or her ow

The clavicle hook plate achieves like most other operative techniques, a high percentage of union and a low percentage of complications however concerns about long term complications still exist, particularly the involvement of the acromioclavicular joint. To evaluate the results and long term effects in use of this plate we performed a retrospective analysis with a mean follow up of 65 months. Results. AO hook LCP fixation for distal-third clavicle fracture (Neer type II) produced satisfactory radiologic outcomes, including high union rates (100%) and coracoclavicular distance maintenance, as well as satisfactory clinical outcomes, including visual analog scale score for pain, shoulder scores (subjective shoulder value, University of California-Los Angeles shoulder score, American. Introduction We used a new internal fixative implant, the AO clavicle hook-plate, for treatment of unstable fractures of the distal clavicle. This study describes the operative procedure and the clinical results obtained, as well as discussion of the advantages and problems encountered. Patients and methods Fifteen consecutive patients with unstable fractures of the distal clavicle (Neer type.

The Acumed Clavicle Plating System provides surgeons with the ability to address acute fractures, malunions, and nonunions of the clavicle with 33 different clavicle-specific plating options. The Clavicle Plating System offers low and narrow-profile plate solutions that are precontoured to match the natural shape of the clavicle The 3.5 mm LCP Hook Plate is indicated for fractures, osteotomies and nonunions of small bones, including the ulna, radius, tibia and fibula, particularly in osteopenic bone. 094219-180628 4 | A.L.P.S. Clavicle Plating System Surgical Technique. The A.L.P.S. Clavicle System offers three families of plating solutions based on varied fracture patterns and surgeon preference. Clavicle bones are unique by nature. The system was designed to allow both intuitive fit, and intraoperative . flexibility to personalize plate fit as desired.

Clavicular hook plates are effective fixation devices for distal clavicle fractures and severe acromioclavicular joint dislocations. However, increasing number of studies has revealed that subacromial portion of the hook may induce acromial bony erosion, shoulder impingement, or even rotator cuff damage. By sonographic evaluation, we thus intended to determine whether the presence of hook. From February 2005 to November 2008, 65 patients with distal clavicle fractures randomly received Comparison of Hook Plate and Tension Band Wire in the Treatment of Distal Clavicle Fractures. Distal Clavicle Fractures. Distal clavicle fractures are traumatic injuries usually caused by direct trauma to the shoulder from a fall in adults. Diagnosis is confirmed with standard shoulder radiographs and a 15° cephalic tilt view (zanca view). Treatment is immobilization or surgery, depending on the displacement and stability of the distal.

Clavicle hook plate fixation for distal-third clavicle

In the group treated with clavicle hook plates, one patient sustained a clavicle fracture, and two fractures went on to nonunion. More recently, Lee et al 31 retrospectively reviewed patients treated with either clavicular hook plates or tensionband wiring (32 and 20 patients, respectively). Hook plating was associated with a lower complication. A hook-plate is a clavicular small fragment AO plate with a hook engaging below the acromion. It is primarily used to secure the ligament repair in the treatment of displaced acromioclavicular joint dislocations. We have used the hook-plate in conjunction with a Weaver-Dunn procedure to secure the repair in seven patients Dou Q, Ren X. Clinical therapeutic effects of AO/ASIF clavicle hook plate on distal clavicle fractures and acromioclavicular joint dislocations. Pak J Med Sci. 2014;30(4):868-71. Article Google Scholar 4 The subject VariAx Clavicle Hook Plate is substantially equivalent to the VariAx Clavicle System (Kl 13760 & K1 301 16), AAP AcroPlate (K(030909) and Synthes (USA) Clavicle Hook Plates (K(06 1753) in regards to intended use, design, materials, and operational principles for use for use in internal fixation in the clavicle The Clavicle Hook Plate provides a single solution for. fixation of both lateral clavicle fractures and. acromioclavicular joint injuries. This plate and screw. construct allows early rotational mobility of the shoulder. 1. Introduction. Clavicle hook plate fixation is indicated when there is insufficient bone in the distal clavicular fragment.

Background: The ideal fixation method for unstable distal clavicle fractures is still controversial. Clavicular hook plates (HPs) are an effective option but the clinical efficacy and advantages/disadvantages of this implant compared with the tension band wire technique in treating this fracture have not been determined 3.5mm Clavicle-Hook-Plate. for lateral fractures of the clavicle (Jaeger and Breitner), dislocations of the acromioclavicular joint and/or to secure a ligament reconstruction with an autograft in symptomatic chronic AC joint instabilities. Surgical Technique Guide Clinical Case 1. The rounded, tapered hook design and the hook angle facilitate a. 6 | ANTHEM® Clavicle Fracture System PLATE CONTOUR Superior, anterior, and hook plates are offered in two distinct contour options (shallow or deep) to accommodate a range of patient anatomy. Shallow contour Deep contou Finally Had My Plate Removed. The plate that was installed to help fix my clavicle fracture was a mixed blessing. On one hand, the plate served an important purpose—to fix my broken clavicle in the correct position for proper healing. This, it did quite perfectly. I can happily say that my shoulder is back to its pre-crash state, minus a.

The VariAx 2 Clavicle Plating Systems provides surgeons with a comprehensive range of anatomic plating options that work with a common instrument and screw platform. Plates utilize SmartLock technology which permits polyaxial screw placement. You can angle locking screws up to 15˚ in each direction for a total range of 30˚ providing you with. fore, careful positioning of the hook is required for preventing acromial fractures. How to cite this paper: Tamiya, H., Umemoto, S., Akimoto, Y., Kyo, T., Gamo, K. and Kuratsu, S. (2019) Posterior Posi-tioning of a Clavicle Hook Plate Is a Risk Factor for Acromial Fractures after Acro-mioclavicular Joint Dislocation. Open Jour Clavicle ORIF (Rockwood Pin / Hook Plate) In-Patient • Confirm from op notes patient to follow protocol. (i.e. fixation satisfactory for mobilisation). • Teach Home exercises o Pendulum movements o Active assisted/ Passive Flexion and Abduction to 90 degrees elevation. o Elbow, wrist and hand. • Teach post op restrictions o No rotatio n=41), and the Clavicle Hook Plate Group (CHPG, n=37) according to the surgical method. The 2 groups were com-pared for scores of VAS and SSV before and after the surgery, the Constant score for shoulder joint function before, at 3 months and 6 months after the surgery, and diaplasis loss at 3 d, 3 months and 6 months after the surgery Background: The goal of this study was to evaluate whether a modified fluoroscopic technique for positioning a hook plate affected the clinical results of treating Neer type II distal clavicle fractures and Rockwood type V acromioclavicular (AC) joint separations with this device. Methods: The study was a retrospective consecutive case series with data analysis

Clinical therapeutic effects of AO/ASIF clavicle hook

  1. e whether there is subacromial impingement caused by hook plate fixation, and evaluate the mechanical strength of the clavicle hook plate construct.. Methods: Eight fresh-frozen cadaveric shoulders with a mean age of 48 years (range, 37-69) were used
  2. Clavicular hook plate may induce subacromial shoulder impingement and rotator cuff lesion - dynamic sonographic evaluation Hsin Yu Lin, Poo Kuang Wong, Wei Pin Ho , Tai Yuan Chuang , Yi Shyan Liao, Chin Chean Won
  3. clavicle was involved in 30 cases and the left in 33 cases. The patients were operated on within 7 days of the injury using a clavicle hook-plate (Stratec Medical, Oberdorf, Switzerland). The operation was carried out by the surgeon on duty and there were 23 operating surgeons. The mean number of operations per surgeon was 4 (1-24). 12 surgeon
  4. Treatment of Distal Clavicle Fracture Using Hook Plate @article{Ahn2011TreatmentOD, title={Treatment of Distal Clavicle Fracture Using Hook Plate}, author={Su Han Ahn and Hyeong Jo Yoon and Kwang Yeol Kim and H. C. Kim and I. Y. Kim}, journal={Journal of the Korean Fracture Society}, year={2011}, volume={24}, pages={48-54}
  5. The Clavicle Plate and Screw System is a comprehensive set of plates, screws, and instruments designed to treat midshaft and distal clavicle fractures. The stainless steel plates are low profile and precontoured with locking and nonlocking screw options in each plate. Secondary fixation to the coracoid is achieved through the plate using AC.

3.5mm Clavicle Hook Plate DePuy Synthes J&J Medical ..

Here, we evaluated the clinical and radiologic outcomes of a novel hybrid hook LCP for Neer type V distal clavicle fractures compared to the outcomes of a conventional AO hook plate. Methods Seventy-eight consecutive patients who underwent hook LCP fixation for Neer type V distal clavicle fractures were included The Response Ortho Clavicle Hook Plate is designed to be a comprehensive solution for repairing fractures located at the distal portion of the clavicle and Acromioclavicular separations. Standard ORIF procedures including, pinning, reconstruction, and DC plating are not appropriate for preserving Acromioclavicular joint function The hook end of a prebent plate (3.5 mm, titan, DePuy Synthes, Switzerland) was inserted underneath the acromion, and the proximal end of the plate was temporarily fixed to the clavicle with a.

TriMed Inc. In an industry where traditional methods of plate and screw fixation drive a fiercely competitive market, TriMed has advantageously positioned itself as one of the lead innovators in the field of orthopaedics by redefining the treatment of periarticular fractures through ORIF Clavicle hook plate is a common implant for treating distal clavicle fracture. Although high bone union rate and good functional outcome have been reported, so have several complications, such as osteolysis and fracture of the acromion, loss reduction, hook impingement, and rotator cuff tear Lee W, Choi CH, Choi YR, Lim KH, Chun YM. Clavicle hook plate fixation for distal-third clavicle fracture (Neer type II): comparison of clinical and radiologic outcomes between Neer types IIA and IIB. J Shoulder Elbow Surg. 2017 Jul;26(7):1210-1215. doi: 10.1016/j.jse.2016.11.046. Epub 2017 Jan 26 The hook goes under the acromion and when I push down on the plate end this reduces the ACJ back into alignment and I can attach the plate to the clavicle with screws. By reducing the ACJ back to its original alignment, the torn ends of those ligaments come together and can heal up

Manufacturer of Clavicle Hook Plate offered by Sigma Surgical Private Limited, Ahmedabad, Gujarat. Sigma Surgical Private Limited. Ahmedabad, Gujarat. GST No. 24AACCS7802F1ZM. TrustSEAL Verified. Call 08048762453 71% Response Rate. SEND EMAIL Hook is placed on the posterior aspect of the clavicle with plate over the superior surface of clavicle. Low profile construct with minimum implant prominence or soft tissue irritation. Shaft holes for 3.5 mm locking or 3.5 mm cortical screws. Uniform stiffness of all segments, prolonging fatigue life of the implant

Titanium orthopedic plate clavicle hook plate locking plates. $37.00-$45.00/ Piece. 1 Piece (Min. Order) CN Jiangsu Jinlu Group Medical Device Co., Ltd. 14 YRS. 4.5 ( 7) Contact Supplier. This Clavicle Claw locking plate orthopedic implant is locking type and so called tibia titanium lcp is used for Clavicle bone fracture fixation. Advantage. CONCLUSIONS: The clavicle hook plate is a suitable implant for Neer type II clavicle fractures. The advantage of this osteosynthesis is the possibility of immediate functional aftercare. We observed a high percentage of discomfort due to the implant; therefore, we advise to remove the implant as soon as consolidation has taken place

CLAVICLE INJURY RECOVERY PART 2: COLLARBONE FRACTURE REHABILITATION BEGINS. CLAVICLE HARDWARE REMOVAL PART 3: COLLARBONE FRACTURE -REMOVING THE SURGICAL IMPLANTS. Below are some questions and answers that have been emailed to me. How can the doctors tell when the bone is fully healed and safe enough for the plate to be removed Hook plate for medial clavicle fracture. Indian Journal of Orthopaedics, 2010. Arndt Schulz. Download PDF. Download Full PDF Package. This paper. A short summary of this paper. 37 Full PDFs related to this paper. READ PAPER. Hook plate for medial clavicle fracture. Download Faraj AA, Ketzer B. The use of a hook-plate in the management of acromioclavicular injuries. Report of ten cases Acta Orthop Belg 2001; 67(5): 448-51. [53] Muramatsu K, Shigetomi M, Matsunaga T, Murata Y, Taguchi T. Use of the AO hook-plate for treatment of unstable fractures of the distal clavicle Arch Orthop Trauma Surg 2007; 127(3): 191-4. [54 The second, for very distal fractures, I use the so-called hook plate, which gains mechanical purchase by having a bar or a hook that goes underneath the acromion thus maintaining reduction This study evaluated the clinical and radiological outcomes of unstable distal clavicular fractures treated with an AO Hook plate. Materials and Methods From March 2009 to October 2010, sixteen patients with distal clavicular fractures underwent open plating using an AO Hook plate

Use of the AO hook-plate for treatment of unstable

NEW UPPER EXTREMITY PRODUCTS 6 LCP Clavicle Hook Plate LCP Olecranon Plate: line extension 2.8 mm LCP Drill Guide Long and 2.8 mm Calibrated Drill Bit NEW HAND PRODUCTS 8 Headless Compression. 11 AR-2664L Drill/Screw Guide, distal clavicle plate, left 12 AR-2664R Drill/Screw Guide, distal clavicle plate, right 13 AR-8943-14 Drill Guide, 3.5 mm/2.5 mm 14 AR-8943-03 Drill Guide, 2.6 mm/1.35 mm 15 AR-8943-21 Sharp Hook 16 AR-2662 Verbrugge Forceps w/ Pivoting Jaw 17 AR-8943-20 Periosteal Elevator, curved blade, 6 mm 18 AR-8943-22. standardized lateral clavicle fracture in a model bone. medial fragment. The lateral fragment was fixed with 6 angle-stable bicortical screws of Ø 2.7 mm. The double plate technique was performed using a lock-ing T-plate (A-4655.16) and a locking, straight 8-hole plate (A-4655.08). Both of these were originally indicated fo

Rationale for Hook Plate Fixation of AC Joint and Unstable Distal Clavicle Injuries. By San Diego Institute 792 Videos FEATURING Spero Karas. September 5, 2013 Objectives: To assess both clinical and radiological long-term outcomes after hook plate osteosynthesis for Neer type II lateral clavicle fractures. Design: Retrospective case series. Setting: Level-1 trauma center

AO Lateral Clavicle—Dislocations and Fractures—The LCP

3.5mm Olecranon-Hook-Plate. for the treatment of fractures and osteotomies of the olecranon. Two screw holes on the head of the plate allow for more intraoperative flexibility and prevent potential tilting of the fragments. In addition, the risk of a secondary dislocation is minimized patients with Neer type II distal clavicle fractures who underwent surgical treatment at our institution from 2001 to 2014. We divided the patients into three groups based on the fixation method: patients in Group A were treated by hook plate fix-ation (AO Hook Plate; Synthes, Solothurn, Switzerland), those in Group B were treate ORIF of the distal clavicle fracture will be carried out as follows: Anatomic reduction of the fracture Definitive fixation with a contoured clavicle plate and screws; a AO hook plate; a 3.5 LCDC, reconstruction, or compression plate is acceptable; a 1/3 tubular plate is not acceptable Use of bone graft is optional (iliac crest bone autograft The LCP Clavicle Hook Plate is available in different lengths and hook sizes with a left and right version for optimal sizing and screw positioning for each individual patient. 4 different lengths 4-7 holes Intra-operative choice of hook size Optimized size matching 6 trial implants help determine the proper hook size. - Hook depths 12, 15. The hook plate allows rotatory movements between acromion and clavicle [4] . The main concern with hook plates is that the plates may cause sub acromial shoulder impingement, sub acromial osteolysis [5] or even rotator cuff tear. This has been reported by many authors and it is related to hook plate design (depth of the hook)

Clavicle Hook Plate - Response Ortho LLC

Hook plate fixation of acute displaced lateral clavicle

wishbone medical 100 capital drive warsaw, in 46582 +1-574-306-400 3.5mm Locking Clavicle Hook Plate Specification. Anatomically precontoured, rounded shaft profile minimizes the risk of soft tissue irritation between the plate and surrounding soft tissue, the acromioclavicular joint and the rotator cuff, undercuts in shaft reduce impairment of blood supply, wide variety of plates optimize implant selection Plate fixation compared with nonoperative treatment for displaced midshaft clavicular fractures: a multicenter randomized controlled trial. J Bone Joint Surg [Am] 2017;99-A:106-112. Sharma G, Patil A, Bhardwaj A, et al. Improved function and time to union with plating versus sling for mid-shaft clavicle fractures. Injury 2018;49 (6):1104-1107

Arthroscopic evaluation for omalgia patients undergoing

Moreover, implantations of clavicle hook plates made of different materials (stainless steel and titanium alloy) and with different depths (12, 15, and 18 mm) in patients with acromioclavicular joint dislocation were simulated in the biomechanical analysis. The results indicate that deeper implantation of the clavicle hook plate reduces stress. Forty-nine of the 267 patients were treated using hook plate fixation (DePuy Synthes 3.5 mm LCP® Clavicle Hook Plate or Aplus® Distal Clavicle HOOK Locking Plate System) and another 218 patients treated with intra-articular Kirschner wires fixation, loop suspension fixation or biologic ligament reconstruction The ANTHEM ® Clavicle Fracture System is a comprehensive system designed to treat a wide variety of clavicle fractures. The research-based plate design is engineered to fit the anatomical location where clavicle fractures commonly occur. Features and Benefits. MIDSHAFT42™ Plates clavicle hook plate removal recovery time gowge Like the title says... due to have clavicle hook plate removed around 15th April, what is the normal given period for time out of work/before can start doing anything serious without a sling like going to the gym etc. got some events coming up early May and cautious about having a sling on and. See a doctor: This question's wording is somewhat confusing. If you feel short of breath, tired, dizzy, confused or in any serious pain those could be signs of internal bleeding. I am not sure what is meant by clavicle hook but any operation or trauma has risk of bleeding. See a doctor or go to an urgent care for further evaluation

Distal Clavicle Fracture ORIF with a Hook Plate - Kirsch

For hook plate, which used to be widely accepted as a proper implant hardware for dislocation of acromioclavicular joint and distal clavicle fracture, may bring some annoying complications, such as rotator cuff injury, acromioclavicular joint osteoarthritis, acromial fracture and hook cutout, and clavicle fracture at the medial end of the plate. The hook portion of the hook plate is placed inferior to the acromion, with superior plating on the clavicle. While this does provide excellent reduction of the joint, the plate must be removed in a subsequent surgery to prevent subacromial irritation and iatrogenic damage to the rotator cuff

AO- Lateral Clavicle—Dislocations and Fractures—The LCP

Hook plate fixation: The hook plate is a metal device that keeps the AC joint in a reduced position by hooking its tip under the acromion and fixing it to the clavicle with screws. It can be used alone or in conjunction with other methods of ligament repair AS. Clavicle Hook Plate, 12mm Hook (Tit) AS. Clavicle Hook Plate, 12mm Hook (Tit

Complications with the clavicle hook plate after fixation

Sigma Surgical Private Limited - Offering Aluminium Clavicle Hook Plate in Ahmedabad, Gujarat. Get best price and read about company. Get contact details and address | ID: 1032981053 Alibaba.com offers 858 clavicle hook steel titanium plate products. A wide variety of clavicle hook steel titanium plate options are available to you

Dislocation – DrDistal clavicle hook locking plate

The Proximal Humerus System 3.5 addresses the challenge of reaching a stable support in the calcar region to avoid the risk of loss of reduction. The Clavicle System 2.8 focuses on stability especially in lateral fractures. Both systems feature a range of anatomically shaped plates to fit the individual anatomy The AO classification of clavicular fractures along with the Neer classification system is one of the more frequently used classification systems when assessing distal clavicular fractures.. Classification. The classification system, broken into three categories focuses on the displacement and pattern of the fracture and the integrity of the coracoclavicular ligaments Patients. Forty-four patients, average age 38.4 years (18-66 years), with a Neer type II lateral clavicle fracture treated with the clavicle hook plate between January 1, 2003, and December 31, 2006